IRE 2019: Education and New Products Take the Spotlight (Part 2)
March 22, 2019
If you missed Part 1, which summarizes some favorite sessions from Carlisle’s-sponsored Training & Education Center on the show floor, please click here. See below for Part 2.

Recent statistics indicate that 92% of attendees visit tradeshows to see and learn about new products and services. And the 2019 International Roofing Expo (IRE) is no exception. For years, the IRE has been the launching point for new products and innovations – and is a focal point for all marketers in the industry when assembling marketing plans.

Having won the IRE’s Product Showcase for Best New Product in 2015 for Sure-Flex KEE HP and again in 2018 for RapidLock (RL™) Roofing Systems, Carlisle certainly places a large emphasis on the audience IRE provides and places its new products and innovations center stage.

This year in Nashville, Carlisle once again took the opportunity to showcase several new roofing technologies and launched some game-changing products and systems.

One of these systems was the VacuSeal™ Vent Secured Roofing System. This is an innovative assembly that uses special vents to harness the power of the wind to lock roof membranes in place. VacuSeal systems are productivity-boosting, reduce installation time, and minimize the need for traditional fastening methods. There are no cold-weather limitations for the installation of VacuSeal, and the system is UL certified with uplift certification at 195 psf negative pressure.

Sure-Flex™ PVC Pressure-Sensitive (PS) Cover Strip is another groundbreaking new product launched at this year’s IRE. Used for stripping-in flat metal edging, Sure-Flex PVC PS Cover Strip saves time, labor, and money by eliminating the need for PVC-coated metal or two-piece clip-on edge metal. This product is compatible with a variety of metal finishes and is quick and easy to install; no welding is required. A truly revolutionary product and the first of its kind in PVC single-ply roofing.

Finally, Carlisle unveiled EcoStorm VSH Roof Board, which is a high-density cover board composed of a plastic and cellulose fiber core bonded to a paper facer and a coated glass facer. The core is made from 100% post-consumer packaging that would otherwise end up in a landfill. EcoStorm VSH passes the FM Very Severe Hail (VSH) standard, and is rated Class A UL 790 for fire resistance. This roof board is compatible with mechanically fastened and adhered membranes, as well as having high impact resistance.

With the industry focused on innovation, the ability to take advantage of tradeshows to promote new and game-changing products is just as critical today as it was 20 years ago. I am excited for 2020 and to see what new products will be on display in Dallas – we hope to see you there.

For more information about the International Roofing Expo or Carlisle's participation at industry trade shows, please contact Jason Mortelliti.

    Jason Mortelliti
    CCM Marketing Communications Manager
    Integrated Marketing Communications
    [email protected]
June 11, 2019
Flashing Options for Every Detail

Carlisle offers three different types of Sure-Seal® Pressure-Sensitive (PS) flashings to address the variety of details found on any given roof. All three feature the proven weatherability of EPDM and come with 30-mil of Pressure-Sensitive (PS) SecurTape™ to create a watertight seal. The primary difference among the three is the amount of cure in the rubber, and the process used to manufacture them. PS Elastoform – often called “uncured” flashing – is used to flash irregularly-shaped objects or details with multiple angle changes. The uncured state of the flashing allows the rubber to be formed and stretched into place without reverting to its original shape like cured rubber. The flashing formulation is designed to cure on the roof with exposure to heat. Since it is necessary to limit heat exposure in the manufacturing process; to keep the product uncured; Carlisle requires all edges to be lap sealed. This prevents water from getting between the flashing ply and the tape ply while the material cures on the roof. T-joints, corners, and pockets are all made from Elastoform flashing – which has a 9-month shelf life. PS Overlayment Strip – often called “semi-cured” flashing – utilizes the same Elastoform flashing formulation, but is semi-cured with heat during the manufacturing process. The overlayment strip has the dark black look of uncured flashing, but is 70% cured in order to add tear resistance for stripping in metal edging or end laps. PS Overlayment Strip is packaged without the diamond pattern film, as it is removed during the semi-curing process. This is an easy way to tell the difference between PS Overlayment Strip and a roll of PS Elastoform. Due to the semi-cured nature of PS Overlayment strip, it can seal step-offs at splice intersections of 60-mil rubber without the need for T-joint covers. PS Overlayment Strip is better suited to strip-in seams than PS Elastoform, as it eliminates the need for lap sealant and T-joints. PS Cured Cover Strip is made with the same 60-mil non-reinforced membrane as Carlisle’s standard sheeting, and then laminated to 30-mil of SecurTape. This product is primarily used for stripping-in metal or end-laps and offers the same finished appearance as the field membrane. Due to the fully-cured nature and thickness of the product, T-Joints are required at splice intersections. Carlisle SynTec’s Sure-White® Pressure-Sensitive Flashing is available in Elastoform and cured cover strip options, and is approved for use on both EPDM and TPO roofing systems. Sure-White Elastoform has a more aggressive cure package to account for the fact that the white flashing will not gain as much heat naturally on the roof. This translates into a shorter shelf life of 6 months. Keeping white or black Elastoform flashing cool during long term storage will help to maximize the shelf life. Carlisle SynTec has all your flashing needs covered. For more information about pressure-sensitive flashing, please contact your Regional Technical Manager.     Ron Goodman     EPDM Product Manager     Product Marketing     [email protected]

Read This Post
May 28, 2019
CAV-GRIP III vs. Traditional Bonding Adhesive

With the introduction of Carlisle’s CAV-GRIP™ III Adhesive, it’s faster than ever to install fully-adhered TPO and EPDM. CAV-GRIP III can be used to adhere standard TPO and EPDM membranes in weather conditions down to 25°F, with a much faster application rate and flash-off time than traditional bonding adhesive. Check out this time trial video for proof, and use the tips below to ensure maximum speed and efficiency. Here are some keys to saving time and getting a the most out of CAV-GRIP III: Use larger cylinders and hose splitters: CAV-GRIP III comes in two sizes, 85lb. and 40lb. cylinders. Using 85lb. cylinders allows for more coverage from each tank without having to change tanks. By using a hose splitter, two people can spray CAV-GRIP III from one tank at the same time, allowing for faster application. Keep cylinders warm in cold weather: As CAV-GRIP III cylinders get cold, the coverage rate will be reduced and application will become more difficult. Store cylinders inside or in a hot-box at 70-80° before use. It is important not to set cylinders directly on a metal deck, as this will accelerate heat loss. Instead, always set the cylinder on insulation and use a Power Blanket to keep it warm during application. Overlap is key: When applying CAV-GRIP III to adhere EPDM or TPO in the field of the roof, very little overlap is required. While spraying, try to overlap 1-2 inches to ensure 100% coverage on the back of the sheet and the substrate. However, when using CAV-GRIP III to adhere membranes to walls, it is important to overlap 50% when spraying. Use CAV-GRIP III and these tips to save a ton of time and labor on the roof. The time that used to be spent stirring, rolling, and waiting for adhesive to flash off can be spent laying more squares of roof to get on to the next job more quickly. For more information, please visit the CAV-GRIP III Productivity Booster page, or contact Adam Burzynski with any questions.     Adam Burzynski     TPO Product Manager     Product Marketing     [email protected]

Read This Post
May 14, 2019
Turn a Raining Day Into a Training Day

The roofing industry has endured more than its share of precipitation in recent months. Roofing contractors are challenged to work through backlogs and retain crews during down time. Consider making the next raining day a training day, and bring the crew into the office for additional training. When training content is in short supply, Carlisle SynTec Systems can help. The Carlisle SynTec Systems video hub is an online resource that can help roofing contractors both on and off the roof. This informative web page hosts over 80 short videos that are organized into the following categories: Details: This section features more than 30 videos that walk an applicator through the detailing of Carlisle’s thermoset and thermoplastic roofing systems. All detail videos are available with closed captioning in Spanish and French. What to Expect When We’re Inspecting: This content is great for foremen and applicators. Join a Carlisle field service representative on the roof as he takes the viewer through a step-by-step walkthrough of a Carlisle-warranted roof inspection. By understanding the inspectors’ processes and expectations, foremen can prevent punch-list items, and move onto the next job. Productivity Boosters: This series of videos is great for sales professionals, estimators, foremen, and installers. Viewers will see side-by-side time trial videos that calculate exactly how much labor can be saved by using newer, more innovative products and installation techniques. These productivity-boosting products will help applicators recoup lost time and revenue; and these videos will show them how. Access the Carlisle SynTec Systems video hub today or click the “Watch Videos” link on the Carlisle SynTec Systems home page. For more information about Carlisle SynTec Systems’ virtual educational content and video hub, please contact Rob Reale.     Rob Reale     Director of Integrated Marketing Communications     Integrated Marketing Communications     [email protected]

Read This Post
X
Email to your Colleagues >
Separate multiple emails with a comma or semicolon.
Copy Me


Please log in to share this item by email.
Add to a Collection >
Please log in to share this item to your collections.
Private
Private Collection (change)

Loading...
Invite user by email:
User Invited. Invite another
User Invite Failed, try again.
X
Visibility Options
Public Collection
Anyone with a link can view. No sign-in required.
Private Collection
Only people explictly granted permission can access. Sign-in required.
X

You are now working in your copied collection
Okay