Marketing Announcements

November 17, 2020

Hydropack Modular Roof Garden System Pre-Purchased Stock Marketing Announcement

Hydropack has been Carlisle’s modular tray system of choice due to its innovative design, easy installation, and excellent long-term performance. Carlisle SynTec Systems is excited to offer a pre-purchased and ready-to-ship stock of pre-vegetated Hydropack Modular Roof Garden trays.

November 11, 2020

Carlisle SynTec Systems Announces Splatter Application for Flexible FAST™ Marketing Announcement

Carlisle SynTec Systems is pleased to announce that Flexible FAST 50-gallon drums, 15-gallon drums, and 5-gallon jugs can now be used for splatter application. Splatter application is approved for both membrane and insulation attachment when Flexible FAST is applied using Carlisle-approved dispensing equipment.

October 01, 2020

Carlisle SynTec Systems Introduces ReadyFlash Technology Marketing Announcement

Carlisle SynTec Systems is pleased to introduce ReadyFlash Technology for SecurShield® flat and SecurShield HD polyiso insulation products. ReadyFlash Technology allows applicators to manage adhesive flash-off times by choosing between two different-colored facers on every board. SecurShield products with ReadyFlash Technology feature a dark-colored coated-glass facer (CGF) on one side of the insulation board and a light-colored CGF on the other.

September 29, 2020

Carlisle SynTec Systems Announces its Crossgrip Walkway Rolls Are Now Available in Yellow Marketing Announcement

Carlisle SynTec Systems is pleased to announce its Sure-Weld® TPO and Sure-Flex™ PVC Crossgrip Walkway Rolls are available in yellow—an addition to the existing white and gray color options.

September 25, 2020

Carlisle SynTec Systems Announces its Collaboration with Clean Earth™ Marketing Announcement

Carlisle SynTec Systems is pleased to announce it is collaborating with Clean Earth to help reduce landfill waste from the commercial roofing industry. Carlisle is dedicated to sustainability in all facets of its business, including product packaging. This partnership with Clean Earth will help Carlisle’s customers save money while improving the long-term health of our planet.

September 23, 2020

Carlisle SynTec Systems Introduces Sure-Flex PVC and KEE HP with APEEL Protective Film Marketing Announcement

Carlisle SynTec Systems is pleased to introduce a revolutionary advancement – Sure-Flex™ PVC and KEE HP membranes with APEEL™ Protective Film. APEEL guards the membrane’s surface from scuffs and dirt accumulation during installation, eliminating the need to clean the roof upon project completion. Patented Sure-Flex PVC and KEE HP membranes with APEEL Protective Film are ideal for re-roofing, re-cover, and new construction projects; and can be used on the whole roof or only in areas that are subject to heavy soiling, such as loading areas.

September 11, 2020

Carlisle SynTec Systems introduces a new Sure-Flex™ PVC Walkway Roll Marketing Announcement

Carlisle SynTec Systems is pleased to introduce a new Sure-Flex PVC Walkway Roll. This new heat-weldable walkway roll is 110 mils thick to provide superior protection for PVC and KEE HP membranes in areas exposed to repetitive foot traffic and other hazards. Additionally, the new walkway roll features a herringbone tread pattern for increased slip resistance.

September 01, 2020

Carlisle SynTec Systems Introduces VapAir Seal™ Flashing Foam #115 Packaging Marketing Announcement

Carlisle SynTec Systems is pleased to introduce VapAir Seal™ Flashing Foam #115 packaging. This higher-capacity option provides three times as much coverage as the current VapAir Seal Flashing Foam #41 packaging – 605 board feet compared to 205 board feet, or 9,236 linear feet at 1-inch bead compared to 3,132 linear feet.

August 24, 2020

Carlisle SynTec Systems Introduces its New Slate Gray PVC Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Slate Gray Polyester-Reinforced PVC and FleeceBACK® PVC membranes and accessories. Manufactured in Greenville, Illinois, Carlisle’s Slate Gray products are darker in color for highly visible or sloped roofs, as well as northern roofs that benefit from the warming capabilities of a darker color in the winter season. Slate Gray can also hide dirt accumulation.

August 10, 2020

CAV-GRIP PVC Low-VOC Adhesive Marketing Announcement

Carlisle SynTec Systems is excited to introduce CAV-GRIP PVC Low-VOC Adhesive, a revolutionary new product that can be used for adhering standard PVC to a variety of substrates on both wall and field applications.

July 15, 2020

60-mil Reinforced Sure-Tough EPDM SAT Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its 60-mil Reinforced Sure-Tough EPDM SAT (Self-Adhering Technology). Featuring time-tested and trusted 3” Factory-Applied SecurTAPE™ (FAT), this productivity-boosting membrane can be used to complete adhered EPDM projects in much less time.

June 25, 2020

SunWeld Plus by VELUX Marketing Announcement

Carlisle SynTec Systems is pleased to announce its collaboration with VELUX® to offer SunWeld Plus by VELUX®, our new line of quality commercial skylights. This new line offers a variety of custom skylight options, revolutionary skylight designs such as the Dynamic Dome, and extended warranty coverages up to 20 years.

June 18, 2020

Sure-Flex Yellow PS Warning Strip Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its productivity-boosting 6” x 100’ Yellow Pressure-Sensitive (PS) Warning Strip for use on Sure-Flex™ PVC and KEE HP membranes. This pressure-sensitive product eliminates the need for welding equipment, generators, and extension cords; and uses the same Low-VOC PVC Step 1 Activator and Step 2 Primer as Carlisle’s PVC PS Cover Strip.

June 11, 2020

USG SECUROCK UltraLight Marketing Announcement

Carlisle SynTec Systems is pleased to introduce USG SECUROCK® Brand UltraLight Coated Glass-Mat Roof Board, a gypsum cover board for both adhered and mechanically fastened membrane systems. This product combines superior strength and an ultralight core and is applicable for all cold adhesive roof applications.

May 28, 2020

SureMB 70 SA Base Ply Marketing Announcement

Carlisle SynTec Systems is pleased to introduce SureMB™ 70 SA Base Ply. This self-adhered, 70-mil product can be used as a base ply in multiple-ply systems; it can also be utilized as an air and vapor barrier (AVB) in all Carlisle SynTec roof systems.

May 06, 2020

Reinforced TPO Overlayment Strip Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its Sure-Weld® 6” x 100’ 60-mil Reinforced TPO Overlayment Strip. This product can be used to cover end laps on FleeceBACK® and SAT TPO systems and to strip-in flat metal flanges on details such as TPO coated drip edges, gravel stops, and scuppers.

April 30, 2020

SynTec EPS Flute Fill Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its EPS Flute Fill, a new solution for standing seam metal roof retrofit projects.

April 16, 2020

Carlisle and Detec Systems Collaboration Marketing Announcement

Carlisle SynTec Systems has collaborated with Detec Systems to offer the single-ply industry’s first and only Factory Mutual (FM) rated roof assemblies that include Detec’s TruGround® Conductive Primer, the conductive medium needed for effective Electronic Leak Detection (ELD).

April 13, 2020

Carlisle Introduces New Singular Color Chart for SecurEdge Marketing Announcement

Carlisle SynTec Systems is pleased to introduce a new, singular color chart for all SecurEdge™ products and metal flat sheets.

March 13, 2020

Carlisle Announces New TPO and PVC Vents

Carlisle SynTec Systems is pleased to introduce its redesigned Sure-Weld® TPO and Sure-Flex™ PVC Pressure Relief Vents.

February 20, 2020

Carlisle Discontinues FAST 100LV

Effective April 1, 2020,Carlisle will discontinue FAST 100 LV Adhesive inDual Cartridges, 5-Gallon Jugs, 15-Gallon Drums, and 50-Gallon Drums.

February 12, 2020

Carlisle Introduces X-Tenda Coat TPO Primer

Carlisle SynTec Systems is pleased to introduce X-Tenda Coat™ TPO Primer, a VOC-compliant, solvent-based product that improves the adhesion of acrylic coatings to recently installed TPO membranes (weathered less than 12 months).

January 31, 2020

Carlisle Introduces FleeceBACK RL PVC Marketing Announcement

Carlisle SynTec Systems is pleased to add FleeceBACK RL PVC to the RapidLock (RL) product line. FleeceBACK RL PVC offers the performance characteristics of FleeceBACK PVC while providing a no-temperature-restriction, no VOC, no odor, adhesive-less attachment system.

January 13, 2020

Pipeline Newsletter, Volume 12

Volume 12 of the Strategic Accounts Pipeline newsletter.

December 09, 2019

Carlisle Offers Powerblanket Lite Cylinder Heaters Marketing Announcement

Carlisle SynTec Systems is pleased to offer Powerblanket Lite Cylinder Heaters for use with CAV-GRIP® III and Flexible FAST™ Dual Tank cylinders. Featuring an internal preset temperature and powered by a 120V outlet, Powerblanket Lite Cylinder Heaters’ insulated full-wrap design and even heat distribution help increase the flow rate performance and efficiency of adhesive cylinders in cold temperatures.

November 18, 2019

Carlisle Introduces Light Gray Polyester-Reinforced PVC Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Light Gray Polyester-Reinforced PVC, KEE HP, and FleeceBACK membranes and accessories.

November 12, 2019

Carlisle Introduces Redesigned Seam Probe Marketing Announcement

Carlisle is pleased to introduce its redesigned Seam Probe, which features a more durable steel tip, a larger and more ergonomic handle, and threads that allow it to be used with a stand-up pole.

October 15, 2019

Carlisle Introduces Westile Western Plaza Paver Series Marketing Announcement

Carlisle is pleased to announce the addition of the Westile Western Plaza Paver Series to its product lineup. Western Plaza Pavers are available exclusively for projects located in the western United States and Canada.

September 05, 2019

Carlisle Announces 2020 Warranty Matrix Updates Marketing Announcement

Carlisle SynTec Systems has updated its warranty matrix to include new products and changes in services. These changes will take effect on January 1, 2020.

September 05, 2019

Carlisle SynTec Announces Canada 2020 Warranty Matrix Updates Marketing Announcement

Carlisle SynTec Systems has updated its warranty matrix to include new products and changes in services. These changes will take effect on January 1, 2020.

August 20, 2019

Carlisle Introduces InsulBase HD Polyiso Marketing Announcement

Carlisle SynTec Systems is pleased to introduce InsulBase HD Polyiso, a ½”-thick insulating cover board for use in mechanically attached and induction welded single-ply membrane roofing systems.

July 18, 2019

Carlisle Introduces an Improved Metal Flat Sheet Program Marketing Announcement

Carlisle SynTec Systems is pleased to introduce an improved Metal Flat Sheet Program with more opportunities for applicators to include shop-fabricated edge metal in Edge-to-Edge Total System Warranties.

April 08, 2019

Carlisle Announces Polyiso Bundle Double Packaging Marketing Announcement

Carlisle SynTec Systems is pleased to announce that all its Polyiso manufacturing facilities now offer double packaging for 4’ x 4’ bundles with unique material codes. Contractors often prefer these double packs for jobsite deliveries because they’re quicker to unload and stage, which cuts down on crane time.

April 04, 2019

Carlisle Introduces EcoStorm VSH Marketing Announcement

Carlisle SynTec Systems is pleased to introduce EcoStorm VSH® Cover Board. This product is an engineered composite building material made from a proprietary blend of plastic and cellulose fiber, which is sourced from post-industrial and post-consumer waste streams. EcoStorm VSH is a durable, extremely moisture- and mold-resistant material with a core that does not disintegrate or delaminate in the presence of water.

March 21, 2019

Carlisle Announces Flexible FAST for Membrane Attachment Marketing Announcement

Beginning January 1, 2020, Carlisle will require the use of Flexible FAST Adhesive for all FleeceBACK™ membrane attachment. Since its inception in 2008, Flexible FAST has steadily gained popularity because of its performance benefits. With the introduction of Flexible FAST dual tanks and five-gallon jugs, Carlisle now offers one industry-leading product that can be used year-round for both membrane and insulation attachment.

March 14, 2019

Carlisle Introduces APEEL Cover Tape Marketing Announcement

Carlisle SynTec Systems is pleased to introduce two new accessories that are specially designed for use on Sure-Weld® TPO membranes with APEEL™ Protective Film. Carlisle’s new APEEL 6” Cover Tape and APEEL Cover Tape Applicator allow contractors to keep 100 percent of the TPO surface—including the seams and areas around details—clean during installation.

March 13, 2019

Carlisle Announces Flexible FAST EU Dual Tanks Marketing Announcement

Carlisle SynTec Systems is pleased to add Flexible FAST EU Dual Tank Adhesive to the FleeceBACK® product line. Specially designed for use in the European Union (EU), this product is free of VOCs, has a quick setup time, and provides outstanding adhesion and wind uplift resistance. Flexible FAST EU Dual Tank Adhesive is a self-contained system; each Part-A box contains a gun, a hose, 10 nozzle tips, 10 nozzle extensions, a wrench, and petroleum jelly.

March 07, 2019

Carlisle Introduces 60-mil Non-Reinforced Sure-Seal and Sure-White SAT EPDM Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its 60-mil Non-Reinforced Sure-Seal® and Sure-White® SAT (Self-Adhering Technology) EPDM. Featuring time-tested and proven three-inch Factory-Applied SecurTAPE™, this productivity-boosting membrane can help contractors complete adhered EPDM projects in less time.

February 19, 2019

Carlisle Announces RapidLock Incentives and Product Line Additions Marketing Announcement

Effective immediately and continuing through May 31, 2019, Carlisle is offering an incentive for first-time RapidLock users. This incentive is intended to encourage contractors to try out the RapidLock System and experience its unique benefits firsthand, and to that end, Carlisle will work with you to make that happen. Additional RapidLock products, including gray RL TPO, 2.6” RL Polyiso, and Coated Glass-Faced (CGF) RL Polyiso, are now available.

February 12, 2019

Carlisle Announces Special-Color TPO Program Marketing Announcement

As the leader in TPO product innovation, Carlisle SynTec Systems is pleased to introduce the industry’s most comprehensive special-color TPO program. Because requests for TPO products in colors other than white, gray, and tan have steadily increased in recent years, Carlisle will begin offering TPO membranes and accessories in the most frequently requested colors: medium bronze, patina green, rock brown, terra cotta, and slate gray.

February 04, 2019

Carlisle Introduces PVC Pressure-Sensitive Cover Strip Marketing Announcement

Carlisle SynTec Systems is pleased to introduce Sure-Flex PVC Pressure-Sensitive (PS) Cover Strip, a groundbreaking new product designed to help contractors save time, labor, and money. Carlisle’s new PVC PS Cover Strip is used for stripping-in flat metal edging and eliminates the need for costly PVC-coated metal or two-piece clip-on edge metal.

January 07, 2019

Carlisle Announces New 3-Gallon Pails of Primer Marketing Announcement

Carlisle SynTec Systems is pleased to announce it will begin offering three-gallon pails of its recently reformulated HP-250 and Low-VOC EPDM/TPO Primer.  The new three-gallon pails can easily accommodate 9”-wide rollers for improved rooftop productivity, especially when applying primer to 6”-wide seams.  In addition to labor savings, HP-250 and Low-VOC EPDM/TPO Primer offer a number of additional benefits.

December 28, 2018

Carlisle Introduces Sure-White® EPDM Product Line Additions Marketing Announcement

Carlisle SynTec Systems is excited to add two new accessory options to the Sure-White EPDM product lineup.

December 17, 2018

Carlisle Announces CAV-GRIP III Can Now Be Used with EPDM Marketing Announcement

Carlisle SynTec Systems is excited to announce that CAV-GRIP III Low-VOC Adhesive/Primer can now be used to bond Sure-Seal®, Sure-Tough®, and Sure-White® EPDM to horizontal substrates for warranty terms up to and including 20-year, 90-mph designs.

November 29, 2018

Carlisle Announces Plaza Paver System Product Line Additions Marketing Announcement

Carlisle SynTec Systems is pleased to announce its Plaza Paver product line is expanding. Carlisle will now offer concrete pavers from Sunnybrook Pressed Concrete and a variety of accessories from MRP Supports, including adjustable and fixed-height supports and EPDM pedestals.

November 16, 2018

Carlisle Announces Warranty Matrix Updates Marketing Announcement

Carlisle SynTec Systems has updated its warranty matrix to include new products and changes in services. These changes will take effect on January 1, 2019.

November 16, 2018

Carlisle SynTec Announces Canada Warranty Matrix Updates Marketing Announcement

Carlisle SynTec Systems has updated its warranty matrix to include new products and changes in services. These changes will take effect on January 1, 2019.

November 07, 2018

Carlisle Introduces VacuSeal Vent Secured Roofing System Marketing Announcement

Carlisle SynTec Systems is pleased to introduce the VacuSeal™ Vent Secured Roofing System. This revolutionary assembly uses special vents that harness the power of the wind to lock roof membranes in place. VacuSeal systems are quick and easy to install and save cost and labor by substantially reducing the amount of glue, ballast, or fasteners a project requires. This engineered system is designed to provide optimal performance while maximizing opportunities for retrofit and monolithic deck applications.

November 01, 2018

Carlisle Introduces CAV-GRIP III Product Line Additions Marketing Announcement

Carlisle SynTec Systems is excited to add three new products to the CAV-GRIP III product line.

October 24, 2018

Carlisle SynTec Introduces Additional Thermoplastic Weldable Vents Marketing Announcement

Carlisle SynTec Systems is pleased to announce additions to its line of Sure-Weld® TPO and Sure-Flex™ PVC prefabricated accessories. Carlisle now offers heat-weldable TPO and PVC One-Way and Two-Way Pressure Relief Breather Vents, Square Top Vents, and T-Top Vents. These vent offerings are pre-flashed, metal vents that are ready for installation. Available in standard white, these vents can also be custom-ordered in gray and tan.

September 17, 2018

Carlisle Announces Warranty Pricing Adjustment for EPDM FAT Marketing Announcement

Years ago, Carlisle SynTec Systems established a one-cent-per-square-foot warranty discount for projects that use EPDM with Factory-Applied Tape. The discount was intended to help promote this productivity-boosting seaming method. After years of offering this discount, Carlisle has succeeded in achieving a high adoption rate for EPDM with Factory-Applied Tape. Consequently, for Notices of Award (NOAs) submitted after December 31, 2018, Carlisle will no longer offer a warranty discount on Factory-Applied Tape.

September 06, 2018

Carlisle Introduces New TPO and PVC Crossgrip Walkway Rolls Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its Sure-Weld® TPO and Sure-Flex™ PVC Crossgrip Walkway Rolls. These laborsaving walkway rolls require no fastening, provide a firm, slip-resistant surface, and feature an open-grid design that allows water and wind to pass through easily. TPO and PVC Crossgrip Walkway Rolls are available in white and gray. PVC Crossgrip Walkway Rolls can be used on PVC and KEE HP membranes.

August 31, 2018

Carlisle Introduces Updated NVELOP Program Marketing Announcement

Carlisle Construction Materials (CCM) is pleased to introduce its updated NVELOP Building Envelope Solutions program, which combines products from Carlisle SynTec Systems, Carlisle Coatings and Waterproofing, Hunter Panels, and Insulfoam. Using precise color details, NVELOP provides clear instructions on how to properly tie dissimilar CCM materials together for long-term air- and water-tight protection that’s backed by the industry’s only single-source tie-in warranty.

August 29, 2018

Carlisle Updates Packaging of TPO Cut-Edge Sealant for New York State Requirements Marketing Announcement

The introduction of Carlisle’s Low-VOC TPO Cut-Edge Sealant eliminates the necessity of packaging standard TPO Cut-Edge Sealant in eight-ounce bottles to meet New York state VOC requirements. Therefore, eight-ounce bottles will be discontinued when current inventory is depleted.

August 03, 2018

Carlisle to Change Canadian CAV-GRIP III Cylinders Marketing Announcement

Canadian legislation regarding the use of pressurized cylinders requires Carlisle to change the cylinders used to package CAV-GRIP™ III Low-VOC Adhesive/Primer. This change, effective August 1, 2018, will affect the product code and list price.

July 26, 2018

Carlisle Introduces New OPTIM-R Vacuum Insulated Panel (VIP) Marketing Announcement

Carlisle SynTec Systems is pleased to introduce the OPTIM-R Vacuum Insulated Panel (VIP), a unique solution for roofing projects with insulation height restrictions.

June 18, 2018

Carlisle SynTec Introduces New Sure-Seal EPDM HP-250 Primer Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its reformulated Sure-Seal® EPDM HP-250 Primer. This new formulation provides excellent long-term peel and shear performance as well as several other notable improvements.

May 23, 2018

Carlisle Introduces New Offerings For Sure-Weld TPO with APEEL Protective Film Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its expanded lineup of Sure-Weld TPO membranes with APEEL Protective Film, which includes new sizes, colors, and membrane types.

May 11, 2018

Carlisle Introduces 20" Sure-White Pressure-Sensitive Cured Flashing Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its 20” Sure-White Pressure-Sensitive (PS) Cured Flashing. Featuring a monolithic 20” of SecurTAPE™, this productivity-boosting accessory can be used for a variety of curb and pipe flashing details.

April 19, 2018

Carlisle Introduces FleeceBACK Fire-Rated (FR) TPO Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its FleeceBACK Fire-Rated (FR) TPO roofing system. This system uses Carlisle’s patent-pending optimized fleece to provide a UL Class A fire rating for direct application to wood decks.

April 17, 2018

Carlisle Introduces LIQUISEAL Liquid Flashing Marketing Announcement

Carlisle SynTec Systems is pleased to introduce LIQUISEAL Liquid Flashing. This two-component, polyurethane-based system creates a reinforced, cold-applied liquid flashing that is compatible with all Carlisle EPDM, TPO, PVC, and KEE HP membranes and is ideal for flashing oddly shaped penetrations and tying together dissimilar roofing systems without building a knee wall or impeding drainage.

April 17, 2018

Carlisle Introduces Polyester-Reinforced FleeceBACK PVC/KEE HP Membranes Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its Polyester-Reinforced FleeceBACK® PVC and KEE HP membranes. Polyester reinforcement provides greatly increased tear strength, breaking strength, and puncture resistance when compared to fiberglass reinforcement.

April 05, 2018

Carlisle Introduces Revolutionary RapidLock Roofing System Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its revolutionary RapidLock (RL™) Roofing System. This adhesive-free system uses Velcro® Brand Securable Solutions to fully attach 115-mil FleeceBACK® RL EPDM or FleeceBACK RL TPO to InsulBase® RL or SecurShield® HD RL polyiso insulation.

April 02, 2018

Carlisle Introduces Continu-Care Preventative Maintenance Warranty Extension Program Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its Continu-Care Preventative Maintenance Warranty Extension program. This program allows Carlisle Early Bird Authorized Applicators to extend the duration of Total System Warranties on newly installed roofing systems. By conducting annual preventative maintenance, warranties can be extended by five years at no additional charge, for a total of up to 30 years of coverage.

February 01, 2018

Carlisle Introduces New Air and Vapor Barrier Field Guide Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Air and Vapor Barrier Field Guide. This industry-leading guide will provide the most comprehensive collection of air and vapor barrier installation information on the market.

January 17, 2018

Carlisle Improves Branding on TPO Packaging Marketing Announcement

Carlisle is pleased to announce that effective February 5, 2018, it will begin packaging its 10’ x 100’ rolls of 60-mil white Sure-Weld TPO membrane in a new, branded stretch film. This new film will improve brand recognition and simplify product identification for applicators on the rooftop.

January 09, 2018

Carlisle Introduces CAV-GRIP III Adhesive Marketing Announcement

Carlisle SynTec Systems is excited to introduce CAV-GRIP III Adhesive, a revolutionary new product. Initially designed for use on vertical surfaces, the original CAV-GRIP’s ease of use and labor-saving qualities led to the development of a new and improved formulation. CAV-GRIP III can be used in the same applications as the previous formulation, including adhering standard TPO and FleeceBACK EPDM, TPO, and PVC to vertical surfaces. In addition, CAV-GRIP III is also approved for application of non-FleeceBACK EPDM to vertical surfaces.

December 20, 2017

Carlisle to Package its PVC and KEE HP Membranes in 4-Packs Marketing Announcement

Carlisle is pleased to announce it will begin packaging its Sure-Flex PVC and KEE HP membranes in 4-Packs starting in December 2017.

December 04, 2017

Carlisle Discontinues FAST Winter Grade Marketing Announcement

Carlisle SynTec Systems’ FAST Winter Grade (IC) Bag-in-a-Box and Dual Cartridge Adhesive will be discontinued once current inventory is depleted.

November 15, 2017

Carlisle Adds Two Drain Options to Accessories Product Line Marketing Announcement

Carlisle SynTec Systems is pleased to announce the addition of the Hercules Retrofit Drain and the SpeedTite Roof Drain to its product offering. Both drains are compatible with all Carlisle roof membranes and feature a mechanical seal and a Carlisle Construction Materials branded strainer.

November 07, 2017

Carlisle Introduces InsulBase NH and SecurShield NH Polyiso Insulations Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its InsulBase NH and SecurShield NH polyiso insulations. These products provide the same performance characteristics as standard polyiso products but contain no halogenated flame retardants.

October 25, 2017

Carlisle Introduces FAST and Flexible FAST 5-Gallon Jug Adhesives Marketing Announcement

Carlisle SynTec Systems is pleased to announce the addition of FAST and Flexible FAST 5-Gallon Jug Adhesives to its FleeceBACK product line. FAST and Flexible FAST 5-Gallon Jug Adhesives are VOC free and provide outstanding wind uplift resistance, adhesion, strength, and setup time. Carlisle’s patented jug design offers unmatched moisture resistance, increased durability and adhesive visibility, and features easy-load handles.

August 22, 2017

Carlisle Improves VapAir Seal 725TR Product Marketing Announcement

Carlisle SynTec Systems is pleased to announce significant improvements to its VapAir Seal 725TR Air & Vapor Barrier/Temporary Roof. Beginning in August 2017, Carlisle’s VapAir Seal 725TR will feature improvements that will result in easier installation, less handling, wider temperature window, and less waste.

August 17, 2017

Sure-White PS Accessories Approved for TPO Systems Marketing Announcement

Carlisle SynTec Systems is pleased to announce that a number of productivity-boosting Sure-White EPDM Pressure-Sensitive (PS) accessories are now approved for use on Sure-Weld TPO roofing systems with up to 20-year Total System Warranties.

August 11, 2017

Carlisle Improves PVC and KEE HP Membrane Cleaner Marketing Announcement

Carlisle introduces its improved PVC/KEE HP Membrane Cleaner. This new, more effective cleaner provides enhanced workability, which reduces flash-off time and yields better welds.

July 28, 2017

Carlisle Introduces Reformulated Low-VOC EPDM & TPO Primer Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its reformulated Low-VOC EPDM & TPO Primer, which provides excellent long-term peel and shear performance, as well as several other notable improvements.

July 18, 2017

Carlisle Introduces 20-inch Pressure-Sensitive Cured Flashing Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its 20” Pressure-Sensitive Cured Flashing. Featuring a monolithic 20 inches of SecurTAPE, this productivity-boosting accessory can be used to complete a variety of curb and pipe flashing details.

July 06, 2017

Carlisle Introduces ChannelDry Vented EPS Insulation Board Marketing Announcement

Carlisle SynTec Systems is pleased to introduce ChannelDry Vented EPS Insulation Board. The use of ChannelDry in conjunction with one-way and two-way relief vents allows the installation of the roof system to begin upon structural cure of concrete. ChannelDry is mechanically fastened direct to concrete decks to allow for air movement.

May 25, 2017

Carlisle Introduces Flexible FAST Dual Tank Adhesive Marketing Announcement

Carlisle SynTec Systems is pleased to announce the addition of Flexible FAST Dual Tank Adhesive to its FleeceBACK product line. Featuring outstanding wind resistance, adhesion, strength, and setup time, VOC-free Flexible FAST Dual Tank Adhesive is a self-contained system that includes a gun, a hose, 10 nozzle tips, and 10 nozzle extensions in each A-side box.

April 10, 2017

Carlisle Updates PVC Flashing and PVC Overlayment Strip Marketing Announcement

Carlisle SynTec Systems is pleased to announce changes to its Sure-Flex PVC Flashing and PVC Overlayment Strip. These products are now white/gray and white/tan so that if material is left over from a gray or tan job, it can also be used on white jobs.

April 04, 2017

2017 Warranty Matrix Marketing Announcement

The 2017 edition of Carlisle’s warranty matrix is now available. Areas that contain changes and updates include: Roof Gardens, OSB Cover Board, X-Tenda Coat, and hail coverage.

March 24, 2017

Carlisle Updates PVC Inside and Outside Corners Marketing Announcement

Carlisle SynTec Systems is pleased to announce updates to its Sure-Flex PVC Inside and Outside Corners. These products are now white/gray and white/tan so that if material is left over from a gray or tan job, it can also be used on white jobs.

March 21, 2017

Carlisle's Thermoplastic Specs and Details Updated to Include isoweld System

Carlisle SynTec Systems' Sure-Weld TPO, Sure-Flex PVC, and Sure-Flex KEE HP specifications and details have been updated to include the isoweld Induction Welding System and are now available on the Carlisle website.

March 13, 2017

CAV-GRIP Low-VOC Adhesive and Primer for Vertical Wall Applications Marketing Announcement

Carlisle SynTec Systems is pleased to announce that its CAV-GRIP Low-VOC Adhesive/Primer can now be used to adhere standard Sure-Weld TPO membranes and all FleeceBACK TPO, PVC, and EPDM membranes to vertical walls.

December 22, 2016

Carlisle Rebrands Popular Polyiso Product Line Marketing Announcement

Carlisle SynTec Systems is pleased to announce it has rebranded two of its most popular Polyiso insulation products and has created a new Polyiso brochure. Effective immediately, HP-H will now be branded InsulBase and HP-NB will now be branded StormBase.

December 16, 2016

Carlisle Introduces Sure-Weld TPO and Sure-Flex PVC Universal Corners Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Sure-Weld TPO and Sure-Flex PVC Universal Corners. Carlisle’s pre-molded, seamless TPO and PVC Universal Corners are made of injection-molded, 60-mil non-reinforced flashing.

November 15, 2016

Sure-Weld TPO Accessories Manufactured From New TPO Detail Membrane Marketing Announcement

Carlisle SynTec Systems is pleased to announce that Sure-Weld TPO prefabricated accessories will now be manufactured from Carlisle’s new TPO Detail Membrane. Featuring enhanced flexibility and a matching top and bottom ply, accessories made from Sure-Weld TPO Detail Membrane will provide applicators with a number of benefits.

September 22, 2016

Carlisle Introduces New Low-VOC Membrane Cleaner Marketing Announcement

Carlisle is pleased to introduce its new Low-VOC Membrane Cleaner, a solvent-based cleaner formulated with federally exempted solvents. Carlisle’s Low-VOC Membrane Cleaner is compliant with California and Utah VOC regulations and can be used in a wide range of temperatures.

August 24, 2016

Carlisle Introduces Warranty Submittal Sheets Marketing Announcement

Carlisle SynTec Systems is pleased to introduce Warranty Submittal Sheets. Available for a wide variety of Carlisle roofing systems, these interactive, one-page, time-saving checklists can be included in submittal packages in lieu of assembly letters.

July 21, 2016

Inspection Checklists Available for Download Marketing Announcement

Carlisle SynTec Systems is pleased to announce that inspection checklists for EPDM, TPO, and PVC roof systems are now available for download on the Carlisle website.

May 25, 2016

Carlisle Launches Warranty Storefront Marketing Announcement

Carlisle is pleased to introduce its Warranty Storefront, a simple and convenient new way for Carlisle’s authorized applicators to select and pay for warranties online.

May 17, 2016

Carlisle Introduces VapAir Seal Flashing Foam Marketing Announcement

Carlisle is pleased to introduce VapAir Seal Flashing Foam, a spray polyurethane foam (SPF) used in conjunction with Carlisle’s Air and Vapor Barriers. Flashing Foam allows contractors to seal around penetrations quickly and effectively, creating a seamless, continuous seal that provides insulation and protects against air and vapor infiltration.

March 28, 2016

Overburden Components of Warranty Issuance Marketing Announcement

Effective immediately, Early Bird Warranties are not available for projects in which Carlisle Roof Garden Systems, Carlisle Plaza Pavers, and/or solar arrays will be installed atop the roofing membrane. Upon completion of the membrane system, prior to overburden installation, please contact a Carlisle Inspection Coordinator to schedule a jobsite visit.

March 22, 2016

X-Tenda Coat Warranty Process and Specifications Updates Marketing Announcement

Carlisle SynTec Systems’ X-Tenda Coat Limited System Warranties will only be available for applications over Carlisle’s EPDM, TPO, and PVC membranes. X-Tenda Coat Limited Material Warranties are available for applications over metal, modified bitumen, smooth BUR, and single-ply membranes manufactured by others.

January 28, 2016

Warranty Price Change Marketing Announcement

Carlisle is  conducting a thorough review of its warranty policies, coverage options, costs, and pricing. An early conclusion of this review is the need to increase the prices on many standard warranty durations.

January 13, 2016

Carlisle Introduces FAST Dual Tank Adhesive Marketing Announcement

Carlisle announces the addition of FAST Dual Tank Adhesive to its FleeceBACK® product line. FAST Dual Tank Adhesive is VOC compliant and provides outstanding wind uplift resistance, adhesion, strength, and setup time.

December 21, 2015

Carlisle Launches RoofEd eBook Marketing Announcement

Carlisle SynTec Systems is pleased to announce its RoofEd eBook is now available for download through iTunes® and Google Play™.  The first chapter of RoofEd focuses on EPDM roofing systems and the attributes that have made EPDM the membrane of choice for countless contractors, specifiers, and building owners.

October 26, 2015

Carlisle Upgrades Sure-Weld TPO and Sure-Flex PVC Accessory Lines Marketing Announcement

This marketing announcement discusses a number of recent upgrades to Carlisle SynTec Systems Sure-Weld® TPO and Sure-Flex™ PVC accessory lines.

August 05, 2015

Product Codes for Sure-Flex™ PVC & KEE HP Coverstrips Marketing Announcement

Carlisle's fabric-reinforced white and gray Sure-Flex™ PVC and KEE HP Coverstrips are now 75’ long. This modification will allow contractors to spend less time opening cartons and more time working on the roof.

June 17, 2015

Sure-Flex KEE HP Bottom Ply Color Marketing Announcement

Effective immediately, all Sure-Flex KEE HP membranes manufactured at Carlisle SynTec Systems’ Greenville, Illinois facility will have a black bottom ply.

June 11, 2015

SecurEdge™ 400/4000 Series – New Products and Updates: Marketing Announcement

Carlisle SynTec Systems is pleased to announce a number of updates to its SecurEdge™ 400/4000 Series of perimeter edge metal products. With six new, contractor-friendly edge metal profiles and several product enhancements, the re-designed SecurEdge 400/4000 Series provides excellent product performance while reducing labor and material costs.

May 08, 2015

Carlisle Introduces EPDM x-23 Low-VOC Bonding Adhesive Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its EPDM x-23 Low-VOC Bonding Adhesive. Specifically designed for use on Carlisle EPDM membranes, this product flashes off quickly and provides an extended open time and excellent wall adhesion strength.

April 22, 2015

Carlisle Introduces Sure-Weld® TPO Contour Rib™ Profile Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Sure-Weld® TPO Contour Rib™ Profile. This innovative product combines the advantages of a single-ply system with the aesthetic appeal of a standing-seam metal roof.

March 31, 2015

Carlisle Adds Four New Edge Metal Profiles Marketing Announcement

Carlisle SynTec Systems is pleased to announce the addition of four new profiles to its SecurEdge™ and SecurWeld® perimeter edge metal product lines. These innovative new products have been tested and certified according to the ANSI/SPRI ES-1 Approval Standard, and feature labor-saving design upgrades that benefit contractors and building owners.

February 20, 2015

Automated Warranty Emails Marketing Announcement

On February 19, 2015, Carlisle SynTec Systems introduced a new email reminder service for its authorized applicators and manufacturer’s representatives. Once a month, Carlisle will send email reminders regarding any outstanding Repair for Warranty (RFW) reports or warranties pending payment.

February 02, 2015

Reduced Fastener Assemblies Marketing Announcement

Carlisle SynTec Systems, in conjunction with USG Roofing Solutions, recently obtained Factory Mutual approvals (RoofNav numbers pending) for reduced fastening requirements for cover boards in fully adhered assemblies.

January 29, 2015

Carlisle Updates EPDM Warranty Offerings Marketing Announcement

Carlisle SynTec Systems is pleased to announce upgrades to its warranty offerings for EPDM roof systems. The decision to offer these upgrades was based on Carlisle’s 50 years of experience in manufacturing and warranting EPDM roofs, as well as EPDM’s proven history of dependable, long-term performance and resistance to UV and weathering.

January 08, 2015

Roll Lengths and Product Codes Changing on PVC and KEE HP Membranes Marketing Announcement

Carlisle SynTec Systems is changing the roll lengths and product codes for a number of its Greenville-produced PVC and KEE HP membranes.

November 24, 2014

PVC Packaging Changes Marketing Announcement

Effective immediately, Carlisle SynTec Systems is changing the number of rolls packaged per pallet for selected Sure-Flex™ PVC and KEE HP membranes.

November 21, 2014

Prefabricated Edge Metal Marketing Announcement

Prefabricated perimeter edge metal may be warranted in conjunction with Carlisle’s EPDM, TPO, and PVC roofing systems, provided that the edge metal is a Carlisle-branded product and is installed in accordance with Carlisle’s current technical specifications and details. Prefabricated perimeter edge metal not purchased through Carlisle will be excluded from Carlisle’s Golden Seal Total System Warranty.

September 29, 2014

Carlisle Introduces Sure-Weld TPO with APEEL Protective Film Marketing Announcement

Carlisle SynTec Systems is pleased to introduce a revolutionary advancement in TPO membrane system installation. Sure-Weld® TPO with APEEL™ Protective Film guards the surface of Carlisle’s industry-leading TPO membrane from scuffs and dirt accumulation during installation, eliminating the need to clean the roof upon project completion.

September 17, 2014

Design Advisory: Warranty Offerings vs. Performance-Based Design

Design Advisory discussing warranty offerings versus performance-based design.

August 20, 2014

Carlisle Launches Highly Reflective Tan and Gray PVC Membranes Marketing Announcement

Carlisle SynTec Systems is pleased to announce the launch of its new, highly reflective colors of tan and gray PVC membranes. The new “cool” colors use highly reflective pigments that enhance the membranes’ ability to reflect more sunlight, decreasing air conditioning costs while keeping the insulation cooler.

August 11, 2014

Carlisle Introduces 6.5' Sure-Tough Reinforced EPDM

Carlisle SynTec Systems is pleased to introduce its new 6.5’ Sure-Tough™ Reinforced EPDM, ideal for projects requiring FM 1-90 ratings.  When Carlisle’s 6.5’- wide sheets are used in conjunction with HP-XTRA fasteners and HP-XTRA Polymer Seam Plates at 12” on center, the system qualifies for an FM 1-90 rating over a grade C steel deck.

June 27, 2014

Carlisle Introduces Sure-Flex PVC Contour Rib Profile Marketing Announcement

Carlisle SynTec Systems is pleased to introduce its new Sure-Flex™ PVC Contour Rib™ Profile. This innovative product combines the advantages of a single-ply system with the aesthetic appeal of a standing seam metal roof.

June 01, 2014

Standing Seam Metal Roofing Program Marketing Announcement

Carlisle Metal Products (CMP), in partnership with Drexel Metals, is pleased to announce the launch of its new Standing Seam Metal Roofing Program

May 06, 2014

Carlisle Adds FleeceBACK PVC FRS Membrane to its Product Line

Carlisle SynTec Systems is proud to announce the addition of FleeceBACK® PVC FRS membrane to its FleeceBACK PVC product line. FleeceBACK PVC FRS features the superior weatherability, flexibility and toughness of Carlisle’s PVC, a high-strength fiberglass reinforcing scrim for added dimensional stability, and a polyester fleece backing for increased puncture- and tear-resistance.

April 29, 2014

Carlisle Upgrades KEE PVC Membranes to KEE HP Marketing Announcement

Carlisle SynTec Systems is pleased to announce that all of its Sure-Flex™ KEE and FleeceBACK® KEE membranes have been upgraded to contain Elvaloy® KEE HP, a solid, high-performance, high-molecular-weight resin modifier.

March 12, 2014

SureMB 120TG Base Marketing Announcement

Carlisle SynTec Systems is pleased to introduce SureMB 120TG Base, a torch-grade SBS modified base ply.

February 26, 2014

Low-VOC Primer Update Marketing Announcement

Marketing Announcement discussing the name change of Carlisle's Low-VOC EPDM Primer to Low-VOC Primer as its use is now extended to include Sure-Weld® TPO roofing systems.

January 17, 2014

Low-VOC Regulation Update Marketing Announcement

An update on the VOC regulations throughout the U.S.

January 10, 2014

Introducing VapAir Seal MD Marketing Announcement

Carlisle SynTec Systems is pleased to introduce VapAir Seal™ MD, an air and vapor barrier for direct-to-metal-deck applications.

October 30, 2013

Sure-Tite Product Discontinuation Marketing Announcement

Marketing Announcement discussing the discontinuation of Sure-Tite® Fasteners and Sure-Tite Metal Fastening Bar.

September 04, 2013

Design Advisory - Insulation R-Values

This advisory outlines the changes with insulation R-Values

August 01, 2013

Introducing SecurEdge™ 400/4000 Series Marketing Announcement

Carlisle SynTec Systems is pleased to announce the launch of its SecurEdge™ 400/4000 Series, an ANSI/SPRI ES-1 certified perimeter edge metal product line.

July 19, 2013

Retrofitting Aged Single-Ply Membranes Marketing Announcement

The Carlisle FleeceBACK® adhered roofing system can be used to successfully retrofit existing aged single-ply roofing systems.

June 26, 2013

Shortage of Bag in a Box Packaging Marketing Announcement

Marketing announcement regarding industry shortage of the packaging component for FAST Bag in a Box.

May 22, 2013

HydroBond PVC Water-Based Adhesive Marketing Announcement

Marketing Announcement introducing HydroBond PVC Water-Based Adhesive. HydroBond is a high strength,one-sided wet lay-in dispersion adhesive for use with all Sure-Flex PVC and Sure-Flex FleeceBACK® products.

May 21, 2013

Aqua Base 120 Bonding Adhesive Marketing Announcement

Marketing announcement for the new and improved formula for Aqua Base 120 Bonding Adhesive. The new formula features improved long‐term heat aging performance allowing for use in warranties up to 20 years.

May 21, 2013

Factory-Applied Tape (FAT™) Single-Packs Marketing Announcement

Marketing announcement introducing four new single-pack Factory-Applied Tape(FAT) EPDM membrane options.

April 16, 2013

725TR Air & Vapor Barrier 2013 Update Marketing Announcement

Carlisle’s enhanced 725TR will have a new woven polypropylene film to replace both our white summer grade and our black winter grade films. The new woven film will be grey, permitting it to be used in all seasons.

April 04, 2013

Design Advisory: FM Approvals Ratings Change Update (April 2013)

Follow-up to Carlisle's Nov. 2012 announcement highlighting Roof-NAV number changes based on new FM 4470 approvals for mechanically fastened systems on new construction and tear-off projects.

January 09, 2013

Warranty Price Calculator Marketing Announcement

Carlisle's Warranty Price Calculator provides users with a fast and easy means to estimate warranty costs at the time of bid, while helping to ensure that every project receives the most appropriate and cost-effective warranty.

December 06, 2012

2013 X-Tenda Coat Price Increase Marketing Announcement

Due to unavoidable raw material cost increases, Carlisle will implement a 5% price increase on all X-Tenda Coat products. The new pricing will go into effect on January 25, 2013.

November 05, 2012

Design Advisory: FM Approvals Ratings Change - Industry Alert

Design advisory outlining ratings changes to FM 4470.

October 17, 2012

Online NOA Form Update Marketing Announcement

Carlisle has updated its online NOA form in order to ensure the accuracy of the warranties requested by our authorized applicators.

July 12, 2012

FleeceBACK AFX EPDM Change to 4.5 Feet x 50 Feet Marketing Announcement

Carlisle recently changed its FleeceBACK AFX EPDM membranes from 5 feet x 40 feet to 4.5 feet x 50 feet.

April 09, 2012

Installation Advisory: Improving Bonding Adhesive Productivity and Coverage Rates

Installation advisory offers tips and tricks when using bonding adhesive dispensers to ensure proper coverage of Carlisle's various bonding adhesive options.

March 27, 2012

Marketing Announcement: HP and Pre-Assembled HP Fastener Changes, 2012

To simplify the ordering process, HP and Pre-assembled HP fastener SKUs and sizes have been reduced. New sizes and part numbers will be implemented when current inventories are depleted.

February 23, 2012

Installation Advisory: Cold-Weather Handling of Low-VOC Products

This installation advisory outlines the precautions that should be taken and considered when utilizing Carlisle's low-VOC adhesives and primers in cold-weather situations.

February 15, 2012

Solvent-Free EPDM Bonding Adhesive Marketing Announcement

Marketing announcement introducing Carlisle's Solvent-Free EPDM Bonding Adhesive, a heat- and moisture-cure product used in one-sided wet lay-in applications.

February 15, 2012

SecurShield HD Plus Marketing Announcement

Marketing announcement introducing Carlisle's SecurShield HD Plus, a Factory Mutual-approved, 1/2" high-density polyiso coverboard for fully adhered systems requiring FM 1-90 ratings with 8 fasteners per 4'x8' board.

February 10, 2012

90-mil Sure-White EPDM Membrane Marketing Announcement

Marketing announcement for new 90-mil Sure-White EPDM membrane, available for inclusion in Carlisle's 30-year Total System Warranty.

February 06, 2012

Design Advisory - 2012 Specification & Details Update

This advisory outlines the newest, and most unique features in Carlisle's Specifications and Details binder, which was updated at the beginning of the year.

February 03, 2012

Updated Warranty Matrix Marketing Announcement - 2012

Marketing announcement for updated warranty matrix that goes into effect on April 1, 2012. This new warranty matrix includes new products and provides pricing and warranty options for all Carlisle roofing systems.

January 19, 2012

SecurShield HD EPS Composite Marketing Announcement

Marketing announcement introducing Carlisle's new SecurShield HD EPS Composite insulation board.

December 01, 2011

ECH-1 Lap Sealant Discontinuation Marketing Announcement

Carlisle will no longer offer ECH-1 Lap Sealant after the current inventory is depleted. As an alternative to ECH-1 Lap Sealant, Carlisle recommends Sure-Seal® Lap Sealant.

November 15, 2011

Reformulated Cold Applied Adhesive Marketing Announcement

Newly reformulated, asphalt‐based Cold Applied Adhesive spreads effortlessly with a flat‐blade squeegee, and is still solvent‐ and odor‐free with minimal VOCs, making it a great alternative to asphalt and kettles.

October 26, 2011

Low-VOC Regulations Update, October 2011

Update on VOC regulations in the 13 Ozone Transport Commission (OTC) states located in the northeastern United States.

October 20, 2011

725TR Winter and Summer Grade Marketing Announcement

Carlisle will now offer 725TR with a white‐film surfacing for summer months and a black‐film surfacing for winter months.

October 20, 2011

Heated Predator Training Video Marketing Announcement

This two-disc DVD guides rig owners and operators through the proper operation and maintenance of Carlisle’s Heated Predator and the Graco Fusion Gun.

September 26, 2011

Sure-Flex PVC Low-VOC Bonding Adhesive Marketing Announcement

Carlisle has improved the performance (FM 1‐225) and lowered the pricing of the Sure‐Flex PVC Low‐VOC Bonding Adhesive, which will replace standard Sure‐Flex PVC Bonding Adhesive once current inventory levels are depleted.

July 25, 2011

Tape Requirement for Warranties Marketing Announcement

Carlisle will no longer allow adhesive splices for any warranted roof projects. Contractors must use either SecurTape™ or Factory‐Applied Tape (FAT™) to receive a warranty for Carlisle’s EPDM roofing systems regardless of the warranty term.

May 10, 2011

16.5ft Sure-White with 3in FAT Marketing Announcement

Due to the overwhelming popularity of our Sure-Seal® 16 ½’ x 100’ EPDM membranes with 3” Factory-Applied Tape (FAT), Carlisle is pleased to announce that the 3” FAT option is now available on our 16 ½’ x 100’ Sure-White 60-mil non-reinforced EPDM membrane.

April 13, 2011

Self-Adhering Technology (SAT) TPO Marketing Announcement

100%-solids hot-melt adhesive fused with Carlisle's TPO sheet to provide laborsavings with no solvents.

March 21, 2011

SecurShield HD Composite Marketing Announcement

SecurShield HD ½” high-density polyisocyanurate cover board (100 psi) combined with SecurShield rigid polyisocyanurate roof insulation (20 psi), resulting in faster, easier installations.

March 11, 2009

VOC Q&A

Q&A on VOC FAQs

August 03, 2007

2007-24 Carlisle Polyiso Packaging & Tarping

Transportation guidelines for Carlisle's polyiso insulation

January 01, 0001

Design Advisory: Winter Advisory Alert - Condensation Issues

This advisory outlines potential condensation issues that may arise during the winter months, primarily when using light-colored roofs in cool, northern climates. Read this advisory to avoid potential problems.

January 01, 0001

News Bulletin: Freight Updates

By now, most people are aware of the ongoing driver shortage plaguing the U.S. trucking industry.Unfortunately, these capacity constraints are expected to continue for the foreseeable future and are being exacerbated by high demand, low unemployment, increased e-commerce, and regulations requiring the use of electronic logging devices. This bulletin will explain the reasons for the trucking shortage, outline the steps Carlisle is taking to secure additional trucking capacity, and offer tips to help customers ensure their requested delivery dates are met.

January 01, 0001

News Bulletin: Impact of Tax Cuts and Jobs Act

The Tax Cuts and Jobs Act approved by Congress in December 2017 includes a provision that reduces the overall cost associated with re-roofing projects and significantly improves the cost-effectiveness of commercial roof replacements that comply with building energy codes.

January 01, 0001

Announcing R-Tech Fanfold Recover Board

1/2 inch fanfold cover board ideal for re-roofing projects and is easy and quick to install

January 01, 0001

RhinoBond

Unique attachment method for Carlisle's TPO roofing systems

January 01, 0001

Carlisle Capital Investments Newsletter, Volume 2

An update on Carlisle's current capital investment upgrades, including insulation plants in Washington and New York states as well as a PVC line in Greenville, Illinois.

January 01, 0001

On-Demand Electronic Warranty Packets

Authorized applicators will now receive warranty packets via email as soon as the warranty is released, unlike before, when the packet was sent via the U.S. Postal Service.

January 01, 0001

Design Advisory - Changing Roof Color Can Lead to Warranty Complications

Changing the color of a performing roof system without involving a design professional can lead to unintended warranty complications and financial consequences.

January 01, 0001

Carlisle Capital Investments Newsletter, Volume 3

An update on Carlisle's current capital investment upgrades, including the Montgomery, NY, Polyiso plant, the PVC line in Greenville, IL, and the announcement of a fifth TPO line in Carlisle, PA.

January 01, 0001

Carlisle Capital Investments Newsletter, Volume 1

The first in a series of newsletters highlighting Carlisle's continued commitment to the roofing and construction industries. It features Carlisle's $110 million investment in 2 insulation plants and a PVC manufacturing facility.

January 01, 0001

REVISED Freight Update - December 2018

The ongoing driver shortage plaguing the U.S. trucking industry is expected to continue in 2019. This bulletin will reaffirm the reasons for the trucking shortage, outline the steps Carlisle continues to take to secure additional trucking capacity, and offer tips to help customers ensure their requested delivery dates are met.

January 01, 0001

Deficit Freight Increase - Effective February 18, 2019

The cost to move freight in North America continues to rise, this also impacts deficit freight rates. In 2017 and 2018 we incurred significant freight increases and as previously communicated this unfavorable trend will continue in 2019. Nevertheless, the Carlisle SynTec Systems’ deficit freight rate that we invoice on less than full truckloads of polyiso insulation has remained at $35 per vacant bundle spot since 2015.

January 01, 0001

Carlisle Announces TPO and PVC Packaging Improvement Marketing Announcment

On February 11, 2019, Carlisle SynTec Systems will begin packaging additional sizes of Sure-Weld® TPO and Sure-Flex™ PVC membrane in a new, branded stretch film. This new film will improve brand recognition and simplify product identification at the warehouse and on the rooftop. It will also include important information, including membrane thickness and code approvals.

January 01, 0001

Carlisle Capital Investment Newsletter, Volume 4

An update on Carlisle's current capital investment upgrades, including the PVC line in Greenville, IL, and the fifth TPO line in Carlisle, PA.

January 01, 0001

Carlisle Capital Investments, Volume 5

An update on Carlisle's current capital investment upgrades, including the PVC line in Greenville, IL, the fifth TPO line in Carlisle, PA, and the Montgomery, NY Polyiso plant.